Install the Hot Sale Adjustable Stainless Steel Self Lock Concealed Drawer Slide
How to install the adjustable stainless steel self lock concealed drawer slide?
1.Measure the depth of drawer slide rail before installation;
2.choose and buy the size of damping slide rail according to the depth of drawer slide rail;
3.pay attention to the screw installation data, reserve the screw installation position.
After measuring the depth of drawer slide rail and determining the size and specification of drawer slide rail, punch holes in the side of drawer according to the installation requirements.
When drilling to determine the location of installation, to avoid deviation. After the preparatory work is done in the early stage, the drawer slide rail shall be installed. The slide rail on the drawer side board shall be installed first, and the screw shall be tightened with a screwdriver. After the safety of the hands to see if you can shake, in order to firmly do not move the better.
Install the sliding rail on the side board of the counter, and pay attention to keep the same level with the sliding rail of the drawer during installation, otherwise the drawer cannot be loaded normally. After the installation of the drawer will be good, more than a few attempts to switch the failure. If there is noise or obstruction to adjust, no obstacle can be used.